Grundig CMS 2000 BT - Setting the Time; Setting the Alarm

ENGLISH
28
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Setting the time
1 To set the time in standby mode, press and
hold »CLOCK« for about 2 seconds.
– Display: »24 HOUR«.
2 Select the hour format (12 or 24 hours) by
pressing »
3
« or »4 « and con-
firm with »CLOCK«.
– The hours flash.
3 Set the hours by pressing »
3
« or
»4 « and confirm with »CLOCK«.
– The minutes flash.
4 Set the minutes by pressing »
3
« or »4
« and confirm with »CLOCK«.
– Display: the current time.
Setting the alarm
1 To set the alarm in standby mode, press and
hold »ALARM« for about 2 seconds.
– Display: »TIMER«.
2 The alarm programs displays; »disc«, »USB«
or »TuneR«. Press »
3
« or
»4 « and confirm with »ALARM«.
– The hours flash.
3 Set the hours by pressing »
3
« or
»4 « and confirm with »ALARM«.
– The minutes flash.
4 Set the minutes by pressing »
3
« or »4
« and confirm with »ALARM«.
– The volume flash
5 The volume displays »VOL 12«. Select the vol-
ume with »
3
« or »4 « and con-
firm with »ALARM«.
– The volume can be selected »VOL 01« to
»VOL 31«.
6 The symbol “TIMER” will then display down on
the right screen to confirm the programming of
the alarm.
Notes:
7
If you want to disable the alarm, press once
the “ ALARM ” button and the symbol
“TIMER” will disappear from the screen.