33
ENGLISH
BLUETOOTH MODE
---------------------------------------------------------------------------------------------------
7
The Micro Hifi System automatically connects
to the last Bluetooth auxiliary device that was
logged on.
7
If the Bluetooth auxiliary device is not recog-
nised, it has to be activated again via its own
menu.
Playback from the Bluetooth aux-
iliary device
1 Start playback on the Bluetooth auxiliary device.
2 Set the preferred volume
with the control knob on
the hi-fi system or press »– VOL +« on the remote
control
3 End playback on the Bluetooth auxiliary device.
Notes:
7
Various functions can also be controlled on the
Micro Hifi System
Press »eII« to pause playback,
press »eII« again to resume playback;
press »
3
« to select the previous track
and »4 « for the next track.
7
Note that the data transmission range can be
as much as 9 m, depending on the Bluetooth
device that is used and the structure of the
building.
Logging out the Bluetooth auxiliary
device
1 Log out the Bluetooth device.
– The display changes to »NO BT«.
Logging the Bluetooth device back on
1 If you move out of data transmission range or
switch off Bluetooth mode, the Bluetooth auxil-
iary device is logged out.
2 To log back on, select your Grundig Connected
Hifi System again on the Bluetooth auxiliary de-
vice.
Note:
7
If it is not possible to connect to a Bluetooth
auxiliary device that was registered previously,
remove your Grundig Connected Hifi System
from the Bluetooth auxiliary device's device list
and repeat the search and connection proce-
dure.
Compatible with the following
devices
Your Micro Hifi System can be connected to any
commercially available Bluetooth-compatible de-
vices that comply with the A2DP standard. This
includes smartphones, laptops and tablet PCs, for
example.
Selecting the Bluetooth input source
1 Select the Bluetooth input source by pressing
» « on the device or » « on the remote con-
trol.
– Display: »BT«.
Finding and connecting a Bluetooth
auxiliary device
1 Activate the Bluetooth function on the Bluetooth
auxiliary device.
2 Start the search function on the Bluetooth auxil-
iary device.
– After a short time, your Grundig Connected
Hifi System will be displayed on the Bluetooth
auxiliary device.
3 Select the Grundig Connected Hifi System on
the Bluetooth auxiliary device and connect to it.
4 When the Bluetooth auxiliary device is con-
nected to your device, »BT« is displayed on the
Grundig Connected Hifi System.
Note:
7
Your Micro Hifi System can only receive and
play the audio signal from one Bluetooth de-
vice; however, up to 8 Bluetooth auxiliary de-
vices can be logged on.
Activating a Bluetooth auxiliary
device that is logged on
Notes:
7
You only have to log Bluetooth auxiliary de-
vices on once.
7
When the Bluetooth auxiliary device leaves
and then moves back into signal range of the
Grundig Connected Hifi System, the auxiliary
device logs on automatically.
To Next Page
Loading...
