Grundig NOCTUS - ALARM MODE; Switching on;off alarm function (Re-activation)

ENGLISH
31
Switching on/off alarm function
1 Switch off the device with »ON/OFF«.
2 Press »e1« twice.
– Display: e.g. »ALARM 1 ɷ « flashes.
3 Press »P+« or »P–« until »AL OFF« appears in the display.
– Display: »ALARM 1« flashes.
4 Press »e1« to confirm.
– Display: »ALARM« and »-:- -«
– The alarm function is switched off, but the alarm times are saved.
Note:
To switch off alarm 2 repeat steps 2 to 4 with »e2«.
5 To re-activate press »e1« twice.
– Display: »ALARM 1« flashes.
6 Press »P+« or »P–« until, for example, »AL RADIO« appears in the
display.
– Display: »ALARM 1 ɷ« and »M 1« flash.
7 Confirm input with »e1«.
– Display: »ALARM 1 ɷ« and the alarm time with the day of the next
alarm operation.
ALARM MODE
____________________________________________
g AL OFF
Ǽ 23:16
ALARM 1
7:30
g 15.06 FRI
Ǽ 9:17
ALARM
-:--