Need help?Do you have a question about the Grundig NOCTUS and is the answer not in the manual?
General| Brand | Grundig |
|---|---|
| Model | NOCTUS |
| Category | Clock Radio |
| Tuner type | Digital |
| Built-in speaker(s) | Yes |
| Display digits | 4 |
| Alarm function | Yes |
| Number of alarms | 2 |
| Snooze function | Yes |
| Sleep timer | Yes |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Battery Backup | Yes |
| Supported radio bands | FM |
| Power Source | AC |
Please note the following information when setting up the system.
Check mains voltage and insert the mains cable into the socket.
Reset the device to original condition by pressing the RESET button.
Details controls and functions on the front of the device including display and buttons.
Details controls and functions on the top of the device including Snooze and Display buttons.
Identifies connectivity ports and the reset button at the rear and bottom.
Explains the function of various control buttons on the device for operation.
Automatic station search and radio-controlled clock synchronization.
Automatically sets time and date via DCF77 transmitter, adjusts for daylight saving.
Manually set radio stations and time/date if automatic setting fails.
Save radio stations to preset positions 1-10.
Manually set the hours, minutes, day, month, and year.
Select time zone with P+ or P- buttons.
Switch between brightness levels or use Snooze/1-10 for temporary higher brightness.
Record a text of up to 19 seconds for use as an alarm or message.
Press ERASE until the display switches to ERASING to delete recording.
How to receive radio stations and adjust volume.
Switching between displays and activating RDS traffic reports.
Enter two alarm programs and select from five alarm types.
Setting alarms using radio, signal tone, or melody.
Use recorded voice as alarm signal, set volume and time.
Use recorded voice as alarm signal, set volume and time.
Create personal weekly rhythm by deleting or re-entering days for alarms.
Check alarm times 1 and 2 without blocking the alarm function.
Press SNOOZE to interrupt alarm; it sounds again after 5 minutes.
Cancel alarm for the rest of the day by pressing ON/OFF.
Switch off alarm for the weekend using WEC; times are saved.
Switch alarm function on/off using 1 or 2 buttons and P+/P- for AL OFF.
Re-activate alarm by pressing 1 twice and selecting alarm type.
Activate sleep timer and enter switch-off time in 10 minute intervals.
Program device to remind with a signal tone using NAP.
Details on UK power supply, plug conversion, fuse replacement, and wiring.
Color coding of wires in the mains lead (BLUE-NEUTRAL, BROWN-LIVE).
Power supply, output, frequency band, dimensions, and weight.
Device conforms to EU directives and safety regulations.
Packaging materials and disposal regulations.
To Next Page