Do you have a question about the Grundig Sonoclock 390 and is the answer not in the manual?
Dimensions (WxDxH) | 185 x 130 x 45 mm |
---|
Protect the device from moisture and avoid placing vessels on it to prevent electrical component damage.
Do not place naked flames, such as candles, on the device.
Ensure adequate ventilation and consider furniture surface additives that may corrode the device.
Use only a clean, moist cloth for cleaning; never open the device casing.
Do not expose the back-up battery to extreme heat.
Details functions of top-mounted controls: Alarm, Time, Snooze, Min, Hour, and Sleep settings.
Explains side controls: slide switch, volume, frequency scales, tuning, and band selection.
Identifies back panel components: mains cable and FM wire antenna.
Describes bottom panel features: battery compartment and indicator LEDs.
Instructions for connecting to mains power, including voltage checks and plug usage.
Guidance on inserting the 9V back-up battery, observing polarity, and proper disposal.
Step-by-step guide to setting the device's current time using TIME, HOUR, and MIN buttons.
Instructions for setting the alarm time and selecting the alarm signal (radio or tone).
How to use the power switch for turning on, standby, and wake-up functions.
Guidance on positioning the wire antenna for optimal FM reception.
Steps for selecting the frequency band (FM/MW/LW) and tuning to radio stations.
Instructions on how to adjust the audio volume of the clock radio.
How to display the last set alarm time or the current time.
Setting up an alarm that wakes you with a radio station.
Setting up an alarm that wakes you with a signal tone.
How to temporarily stop the alarm using the Snooze function.
How to stop the alarm for the current day while keeping the function active.
How to cancel or activate the alarm function from standby mode.
Details the sleep timer function for automatic radio switch-off.
How to manually switch off the sleep timer before the set time.
Guidance on responsible disposal and recycling of the product and batteries.
Provides specifications such as power supply, frequency bands, dimensions, and weight.