Grundig Sonoclock 890 WEB - FM Radio Operations; Selecting FM Source; Selecting Stored FM Stations; FM Reception Modes

ENGLISH
39
Selecting the FM input source
1 Press »M« to select the »FM« input source.
or
1 Press »MENU« to open the menu of the current source.
2 Press » Λ « or » V « to select the »Main menu« option and press
»
OK« to confirm.
3 Press » Λ « or » V « to select the »FM« input source and press
»
OK« to confirm.
– The display changes to the most recently selected FM station.
Selecting stored FM stations
1 Open the FM radio station by pressing one of the preset buttons
»
1I6 I10« on the device (press once for presets 1 - 5, press
twice for presets 6 - 10) or one of the number buttons » «
on the remote control.
Stereo and mono reception
The device has an auto mode, which switches automatically between
stereo and mono depending on the strength of the reception signal.
1 Press »MENU« to open the FM menu.
2 Press » Λ « or » V « to select the »Audio setting« option and press
»
OK« to confirm.
3 Press » Λ « or » V « to select the »Stereo or mono« option and
press »OK« to confirm.
– The auto mode is activated.
or
press » Λ « or » V « to select »Mono only« and press »OK« to
confirm.
– The device is switched to mono reception; unwanted noise
interference is suppressed.
FM MODE
--------------------------------------------------------------------------------------------------
Internet Radio
Music Archive
DAB
FM
›
Stereo or mono
Mono only
›