42
11 Press »
Λ
« or »
V
« to select the »Volume« option and press »OK«
to confirm.
12 Use »
Λ
« or »
V
« to set the alarm volume and press »OK« to con-
firm.
13 Press »
Λ
« or »
V
« to select the »Save« option and press »OK«
to save the alarm settings.
– Display: briefly »Alarm Saved«.
14 Switch the device to standby with »ON/OFF«.
– Display: time, date and »
‚«.
– The device wakes you up at the set time with the selected alarm
tone.
15 To set the second alarm time (»Alarm2«), repeat steps 5 to 13.
Note:
You can also use buttons »AL1« and »AL2« on the remote
control to open alarm times 1 and 2 directly.
Interrupting the alarm
1 When the alarm goes off, press »SNOOZE« on the device or
»
OK« on the remote control.
– The alarm signal (signal tone, Internet radio station, DAB station
or FM station) stops.
– The alarm goes off again at five-minute intervals. The full dura-
tion of the alarm is 90 minutes.
Cancelling the alarm for the day
1 Switch the device to standby with »ON/OFF« when the alarm
goes off.
– The alarm remains activated for the next day.
Activating and deactivating the alarm
1 Press »MENU« to open the menu of the source.
2 Press »
Λ
« or »
V
« to select the »Main menu« option and press
»
OK« to confirm.
3 Press »
Λ
« or »
V
« to select the »System setup« option and press
»OK« to confirm.
4 Press »
Λ
« or »
V
« to select the »Alarms« option and press »OK«
to confirm.
5 Press »
Λ
« or »
V
« to select the »Alarm1« or »Alarm2« option and
press »
OK« to confirm.
TIMER MODE
----------------------------------------------------------------------------------------
On
Mode: Internet
Last listened
Volume
›
14:57:56
06/12/2007
‚
Alarm1: 06:30
Alarm2: Off
›
To Next Page
Loading...
