12
Ver. 1.1
Playing a CD
Open the Ethos lid by manually lifting the small gold handle on the lid arm.
Place the CD on the spindle, being sure to center the CD.
Center the Ethos CD clamp on the CD spindle.
Close the Ethos lid and wait until the Ethos recognizes the CD.
Activate the ‘PLAY’ touch button on the Ethos front or ‘PLAY’ button on the Ethos remote.
Press STOP button on the Ethos front or remote to stop current CD playback
Press PAUSE button on the Ethos front or remote to pause current CD playback.
Press PAUSE or PLAY to re-start CD playback.
Press PREVIOUS on front to select the previous CD track.
Press NEXT on front to select the next CD track.
Selecting Source
The ‘INP.’ Front button toggles between the four different Ethos inputs:
CD-mode: CD-playback only
DAC-mode: 1. Input 1: USB input
2. Input 2: BNC S/PDIF input, 75Ω
3. Input 3: AES/EBU input, 110Ω
To Next Page
Loading...