Gryphon Ethos - Menu-activated functions; Configurable Menu Options

14
Ver. 1.1
Menu-activated functions:
To be able to navigate through the menu options, after entering the Ethos MENU option, some of the
Ethos front touch buttons and Ethos remote buttons are used to switch functions:
PLAY now acts as the menu ENTER button, confirming the selected option.
MENU button is now used to return to previous menu item.
MENU is also used to exit MENU, when not entered a sub-menu.
STOP and PAUSE now scroll up and down among the possible sub-menus and settings.
If the sub-menu CREATE INPUT NAME has been selected, the STOP and PAUSE buttons are used
to scroll between the possible characters and figures.
PREVIOUS and NEXT buttons move the cursor to the left or right where the character or figure is to
be placed.
Options available via the ‘MENU’ function:
1. ‘TIME TO STANDBY’ when no music is playing and no Ethos buttons are pressed:
a. 30 minutes
b. 60 minutes
c. 2 hours
d. 4 hours
e. Infinite (default)
2. ‘OUTPUT GAIN’, -6dB attenuation or 0dB when ‘OFF’ (default).
3. ‘DSD LP-FILTER’, 1st order analog Low-Pass filter ‘OFF’ (default) or ‘ON’.
4. ‘CREATE INPUT NAME’. This menu item makes it possible to change name of each Ethos
DAC input from default standard pre-defined name (USB, S/PDIF & AES/EBU) to a custom
chosen name. Each input name can be up to 8 characters and/or figures long.