1
2
3
STEP 4
INSTALL PEDALS
1. Insert the left pedal (marked L on the axle) into the
hole in the crank, then slowly tighten it with your
fingers. Screw the pedals in the direction of the front
wheel.
2. Turn the bike around to the right side where you’ll find
the derailleurs and gears, and then find the right pedal
(with an R on it). Insert that into the other hole in the
other crank, and lightly tighten it.
3. Locate the pedal wrench that came in your box of
goodies and use it to snugly tighten down both of your
pedals.
SETUP STEP 1 STEP 2 STEP 3 STEP 4 CONGRATS!
To Next Page
Loading...
