What to do if my Gtech HT05 Plus Trimmer stops when cutting?
If your Gtech Trimmer stops while you are cutting, allow the automatic cut out to reset and use a lighter cutting action. Also, inspect the blade for any obstructions and clear them away. Finally, make sure the battery is fully charged.
How to fix Gtech HT05 Plus Trimmer that fails to operate?
If your Gtech Trimmer fails to operate, first, try recharging the battery. If that doesn't work, check the switch to make sure it's clicking properly, which indicates it's operating correctly.
Why has the cutting time reduced on my Gtech HT05 Plus Trimmer?
If the cutting time of your Gtech Trimmer has reduced, consider using a lighter cutting action and cut in multiple stages. Fully discharge and then recharge the battery. Also, try cleaning and lubricating the blade, or consider replacing it.
What to do if the blade will not move on my Gtech Trimmer?
If the blade on your Gtech Trimmer will not move, try cleaning and lubricating it. If that doesn't resolve the issue, you may need to replace the blade.
Why is there no light showing on the charger for my Gtech HT05 Plus?
If there is no light showing on the charger for your Gtech Trimmer, check the connections first. If the light still doesn't appear, check the socket.
Key safety advice for users to prevent injury.
Guidelines for safe handling and charging of the battery.
Specifies the product is for domestic use only.
Instructions on how to adjust the cutting head angle.
To Next Page
General
