1515
Troubleshooting
Motor not running 1. Charge battery
2. Check safety key is inserted and switched on
3. Check switch operation
It will click if operating correctly.
Irregular running/machine
vibrating strongly
1. Blade may be defective
2. Blade may be loose
3. Check the blade is fitted and nut is tightened.
4. Check if any obstacle is preventing normal
rotation of the blade.
Struggling to cut/jamming 1. Push the mower more slowly
2. Raise the cutting height
3. Check for a build-up of grass
4. Blade may be blunt
Cutting blade will not cut 1. Blade is either worn or damaged.
2. Replace blade
Cutting time has reduced
1. Use a lighter cutting action and cut in several stages.
2. Fully discharge and recharge battery.
3. Replace blade.
Mower stops when cutting 1. Handle may be in “park” position.
2. Charge battery.
Trimmer stops when cutting.
LEDs show solid red
1. The mower is overloaded.
2. Check blade and remove any debris.
3. Grass too thick – use lighter cutting action/ raise
height setting.
4. Push the mower more slowly.
4969_MiniMower_manual_aw.indd 154969_MiniMower_manual_aw.indd 15 08/07/2021 10:2008/07/2021 10:20
To Next Page
Loading...
