GTO R4211 - Installing the Receiver

10
Installing the Receiver
Use the transmitter to check the range of the receiver before permanently mounting it.
Consider the following when mounting the receiver:
•Standardreceivercablelengthis10feet(receiverswithalongercableareavailableas
specialorderitems;call the GTO Sales Department).NEVERsplicereceivercable!
•Run the cable through PVC conduit to protect it from damage.
•DONOTruncablethroughmetalconduitbecausethereceiversignalrangewillbe
decreased.
•DONOTruncableinconduitcontainingacwiring.
•Thereceiverrangecanvaryfrom50to100feetdependinguponweather,topography,
and external interference.
•DONOTmountupsidedown.
•DONOTmountonmetalfenceorpost;doingsowilldecreasesignalrange.
•MOUNTsothatyouhavelineofsightbetweenremotetoantenna.
•MOUNT3feetawayfromACvoltage.
•MOUNTashighaspossibleforoptimumrange.
FCC Regulation
ThisdevicecomplieswithFCCrulesPart15.Operationissubjecttothefollowing
conditions:
1. This device may not cause harmful interference.
2. This device must accept an interference that may cause undesired operation.
Transmitter distance may vary due to circumstances beyond our control. NOTE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.