To Next PageTo Next Page
Need help?Do you have a question about the Guardian Fall Protection 01500 and is the answer not in the manual?
General| Product Type | Fall Protection Harness |
|---|---|
| Model Number | 01500 |
| Brand | Guardian Fall Protection |
| D-Ring Locations | Back |
| Weight Capacity | 310 lbs |
| Material | Polyester |
| Standards | ANSI |
| Compliance | OSHA 1926 Subpart M |
Rope Grabs support a MAXIMUM 1 Personal Fall Arrest System (PFAS) for use in Fall Arrest applications.
Rope Grabs may be used in Restraint applications to prevent workers from reaching leading edges.
Account for safety factor, deceleration distance, user height, lanyard length, and harness stretch.
Minimize swing fall hazards by working as close to in-line with anchor point as possible.
Examples of correct and incorrect connector usage with Rope Grab to prevent roll-out.
Materials used include galvanized steel, stainless steel, nylon, and polyester.
Ensure VLL compliance, compatible rope diameter, and eliminate fall hazards.
Steps to attach Rope Grab to VLL, ensuring correct orientation and secure locking.
Inspect for corrosion, deformation, pits, rough surfaces, sharp edges, cracking, rust, etc.
Competent Person inspection required, recorded in log, and on equipment label.
Do not alter equipment or misuse. Assess workplace conditions, select equipment by Competent Person.
Systems must be supervised by Competent Person and designed compliantly with regulations.
Maximum allowable free fall distance for lanyards and SRLs must not exceed limits.
Specifies compatible rope diameter (5/8") and breaking strength (6000 LBS).
Manufacturer's instructions must be read and understood prior to use.
Notes automatic functioning for dorsal attachment only.
