
Do you have a question about the Guardian Fall Protection Bull Ring Anchor and is the answer not in the manual?
| Material | Steel |
|---|---|
| Load Capacity | 5, 000 lbs |
| Finish | Galvanized |
| Mounting Type | Bolt-On |
| Diameter | 5/8 inch Anchor Point |
| Weight | 0.4 lbs |
| Standards | OSHA 1926.502 |
Definition of a person with accredited degree or certification, proficient in planning fall protection systems.
Highly trained person assigned by employer responsible for fall safety program, identifying hazards.
Person assigned by employer to work near or be subject to fall hazards.
Use for supporting a PFAS, withstands 5,000 lbs, max free fall 6' or 12', Dorsal D-ring.
Prevents workers from reaching fall hazard edge, no free fall, max slope 4/12.
Sufficient clearance below anchorage to arrest fall, account for safety factor, deceleration, height, lanyard.
Minimize swing fall hazards, occur when anchor not above fall location, increase injury risk.