Guild BMS210GS - Technical Data and Specifications; Key Technical Specifications; Cutting Capacity Details; Noise Level Information

Customer Helpline 0333 3201989
18
Technical Data
Rated voltage 230-240V~50Hz
Rated Input power 1700W
No load speed 4500 /min
Bevel capacity 0-45°
Mitre capacity 0-45° L&R
Blade size 210 mm
Protection class
/II
Machine weight 9.48 kg
Max cutting mitre/bevel 0°/90° 300x60mm
Max cutting mitre/bevel 45°/90° 300x35mm
Max cutting mitre/bevel 0°/45° 210x60mm
Max cutting mitre/bevel (R) 45°/45° 210x35mm
Technical Data Table
Cutting Capacity
Noise Information
A weighted sound pressure L
pA
: 105.99dB(A)
A weighted sound power L
wA
: 118.99dB(A)
K
pA
& K
wA
=3.0dB(A)
Wear ear protection when sound pressure is over: 80dB(A)
ATTENTION: Through poor conditions of the electrical MAINS, shortly voltage drops can
appear when starting the EQUIPMENT. This can influence other equipment (Eg. Blinking
of the lamp). If the MAINS-IMPEDANCE Zsysmax = 1.989Ω, such disturbances are not
expected. (In case of need, you may contact your local supply authority for further
information).