EN
51
10. Electrical connection by qualified
personnel !
- Switch off the circuit breakers in the
house distribution box !
- Connecting the hob (A).
- Connect fan motor or - Plug in safety
plug (B).
- For exhaust air operation, connect
window contact
(see next page for option).
- Ribbon cable Control cable connect (C)
- Connect LED connection (D)
11. Embed the cabinet with NIVEL in
the kitchen unit and put it on the
final align position.
12. INSTALLATION INSTRUCTIONS - EXTRACTOR HOOD - INSTALLATION:
7. Install the fan motor incl. silencer in the rear of the cabinet.
8. screw on the handle of the drawer and the outlet connection piece.
9. Cut the Naber duct to length and mount it.
Seal with adhesive tape.
To Next Page
Loading...
Need help?
General
