5.9.4. Face recognition Setting
(1) Live detection switch: After this is turned on, the device conducts live detection, and
the non-living registered face cannot be unlocked successfully.
(2) Threshold: face recognition threshold (high, medium, low), different levels
correspond to different face recognition matching degrees. The threshold is high,
and the requirements for face similarity are relatively high, requiring the user to be
closer to the face recorded during registration.
(3)
Camera wake up distance adjustment: The user can adjust the maximum distance
to wake up the camera. The wake-up distance ranges from 0.3 to 2m. If the wake
up distance of the camera is set to the maximum, in the screensaver state, the face
is within 2m of the device, and the device will enter the face recognition interface.
Face recognition Setting
5.9.5. Motion detection Setting
(1) Switch: When this option is enabled, the device will perform motion detection. If the
moving object is near the door machine, the door machine will light up and enter the
main screen.
(2) Sensitivity test: It is for adjusting the sensitivity of the motion, when the sensitivity is
low, the visitor shall be more close to the device.
(3)
Sensitivity test: Within the detection range, whether the device detects an object
To Next Page
