GW Instek ASR-2000 Series - Page 9

9
Selected parameter
Using the Arrow
Keys and Scroll
Wheel
Use the Arrow keys to select a digit power and then use
the scroll wheel to edit the value by that power.
1. Use the Arrow keys to move the cursor to
the digit of the desired value.
2. Turn the scroll wheel to edit the value by the
resolution of the selected digit.
Cursor
3. Press the Enter key to edit the parameter or to enter the
selected menu. Repeat the steps above for all the
relevant digits.
4. Press the Enter key to confirm the edit.
5.
Note
By default the cursor starts at the lowest digit of value.