GW Instek SFG-2110 User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

GW Instek SFG-2110 Specifications

General

Frequency Range	0.1 Hz to 10 MHz
Output Impedance	50 Ω
Frequency Resolution	0.1 Hz
Amplitude Resolution	1 mVpp
Display	LCD
Waveform Types	Sine, Square, Triangle, Ramp, Noise, Arbitrary
Modulation Types	AM, FM, PM
Power Supply	AC 100-240 V, 50/60 Hz
Weight	2.5 kg
Memory	10 arbitrary waveform memories

Summary

Safety Instructions

Safety Symbols

Explains safety symbols like WARNING, CAUTION, and ground terminal.

Safety Guidelines

Lists crucial safety guidelines for operating and storing the SFG-2000 series.

Getting Started

Front Panel Overview

Details the front panel layout, controls, and display for SFG-2100 and SFG-2000 series.

Rear Panel Overview

Explains the rear panel connectors and AC voltage selector for the SFG-2000 series.

Setup Procedures

Provides instructions on how to set up the device, including tilt stand and power connections.

Operation Shortcuts

Sine/Square/Triangle Wave

Frequency Setting

Steps for entering and editing the waveform frequency using numerical keys.

Amplitude Control

Offset Control

TTL CMOS Output

Waveform Selection

Frequency Setting

Duty Cycle Setting

Amplitude Setting

Sweep

Activating Sweep Mode

Steps to activate the sweep function and set parameters.

Sweep Mode Selection

Amplitude Modulation

Activating AM

Steps to activate Amplitude Modulation and set the sign.

Setting AM Depth

External Modulation Input

Frequency Modulation

Activating FM

Steps to activate Frequency Modulation and set the sign.

Setting FM Deviation

Counter Input

Activating Counter

Gate Time Setting

Store/Recall Setting

Storing Panel Settings

Recalling Panel Settings

Appendix

Error Messages

Lists and explains various error messages encountered during operation.

Specifications

Provides detailed technical specifications for the SFG-2000 series instruments.