GW Instek SFG-2010 User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

GW Instek SFG-2010 Specifications

General

Frequency Range	0.1 Hz to 10 MHz
Output Impedance	50 Ω
Display	LCD
Weight	2.5 kg
Square Wave Rise/Fall Time	< 30 ns
Duty Cycle Range (Pulse Wave)	20% to 80%
Waveform Types	Sine, Square, Triangle, Ramp, Pulse
Modulation Types	AM, FM
Power Supply	100-240VAC, 50/60Hz
Total Harmonic Distortion (Sine Wave)	<1% to 100kHz
DC Offset Range	±5V
Output Voltage	10 Vpp (into 50Ω load)
Amplitude	10 Vpp (into 50Ω load)

Summary

Safety Instructions

Safety Symbols

Symbols indicating warnings, cautions, and grounding for safe operation.

Safety Guidelines

Guidelines for safe operation, power supply, fuse handling, and environment.

Getting Started

Front Panel Overview

Description of controls, keys, and displays on the front panel.

Rear Panel Overview

Description of connectors and selectors located on the rear panel.

Setup and Power Up

Instructions for device setup, including tilt stand and initial power on.

Sine/Square/Triangle Wave

Waveform Selection

Frequency Settings

Steps for entering and editing the output frequency using numerical keys.

Duty Cycle for Square Wave

Amplitude and Attenuation

Methods for adjusting waveform amplitude and applying -20dB attenuation.

Offset Adjustment

Counter Input

Activating the Counter

Steps to connect and enable the frequency counter input.

Gate Time and Resolution

Store/Recall Setting

Storing Panel Settings

Saving the current instrument configuration to memory.

Recalling Panel Settings

Loading a previously saved instrument configuration.

Recalling Default Panel Setting

Restoring the instrument to its factory default settings.

Appendix

Error Messages

List and explanations of error messages generated by the instrument.

Specifications

Detailed technical specifications for the SFG-2000/2100 series instruments.