SFG-2000 Series User Manual
28
Set the Duty Cycle (Square Waveform)
The duty cycle setting is not available in sine/triangle waveform.
DUTY
7
Press the Shift key, then 7 to
enter duty cycle editing mode.
The duty sign appears on the
display.
Enter duty
cycle
The default value is 50%.
The settable range is 20% ~
80%, 2Hz ~ 1MHz.
54
Hz/%
Use numerical keys to enter
value.
Example: 45%
MHz
Delete a number (backspace)
Edit duty
cycle
The editing knob changes the
value, and the cursor keys
moves the active digit (same as
entering frequency).
When inactive for 5 seconds, the display automatically
goes back to previous mode (frequency view).
Setting duty cycle (press
DUTY
7
) is not available
when sine or triangle waveform is activated. The
following message appears.
For full error message list, see page
52.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
