1. Press the Record Setup Start icon. This icon will
only be available after a measurement has been
selected with the Setup Multimeter icon (page 13).
2. Choose the Logging tab.
3. Set the logging start time in Begin Logging Data
panel.
Immediately: Choose this option to begin
logging measurements as soon as the “Play”
icon is pressed. (see page 19 for details)
At Time: This option allows you to choose
the exact time that the logging will start.
The start date, hour, minute and second can
be chosen respectively.
On Receiving External Trigger: This
option will only start logging after the TRIG
key is pressed on the DMM front panel or
pin 5 on the Digital I/O port is triggered.
To Next Page
Loading...
