GW Instek GDS-3352A - Set Date and Time; Set the Buzzer Volume

GDS-3000 Series User Manual
144
2. Press System from the lower menu.
3. Press Erase Memory from the side
menu.
A message will prompt you to press Erase
Memory again to confirm the process.
4. Press Erase Memory.
Set the Buzzer Volume
Panel Operation
1. Press the Utility key.
Utility
2. Press System from the lower menu.
3. Press the buzzer icon on the side
panel. Use the variable knob to set
the volume.
Set Date and Time
Panel Operation/
Parameter
1. Press the Utility key.
Utility