GFG-3015 p.47
6.24 The Error message of instrument
The operation of GFG-3015 is a whole digitizing operation user interface. Every
parameter will be showing by numerically and every input value keyed in with
numerical keys. So when key in the value to instrument, it might cause some
mistake, now the GFG-3015 will show a corresponding error code on the
Display a few seconds later for User to correct the data. (Please refer to the
specification or Operation ways). The detailed explanation is as following table:
Error Code Explanation
E01 Frequency over range
E02 Frequency over Resolution
E03 Amplitude over range
E04 Amplitude over resolution
E05 Offset over range
E06 Offset over resolution
E07 Duty over range
E08 Duty over resolution
E09 Mod rate over range
E10 Mod rate over resolution
E11 Mod sym over range
E12 Mod sym over resolution
E13 Sweep freq over range
E14 Sweep freq over resolution
E15 AM span over range
E16 AM span over resolution
E17 FM span over range
E18 FM span over resolution
E19 Trigger phase over range
E20 Trigger phase resolution
E21 Store setting over settng numbers range
E22 Recall setting over settng numbers range
E23 Recall set is no data
To Next Page
Loading...
