GW Instek GPT-9902A

REMOTE CONTROL
127
Function Commands
FUNCtion:TEST ..................................................................................... 127
MEASure<x> ......................................................................................... 128
MAIN:FUNCtion ................................................................................... 129
FUNCtion:TEST
Set
Query
Description
Turns the currently selected test (output) on or off.
When HOLD is displayed on the screen during
AUTO tests, use the FUNCtion:TEST command to
move on to the next step.
Setting the FUNCtion:TEST command to OFF at
the end of a test will also temporarily turn the
PASS/FAIL buzzer sound off.
Syntax
Query Syntax
FUNCtion:TEST {ON|OFF}
FUNCtion:TEST?
Parameter
ON
Turns the test on.
OFF
Turns the test off.
Return parameter
TEST ON
Test is on.
TEST OFF
Test is off.
Example
FUNC:TEST ON
Turns the output on.
w ww . . co m
information@itm.com1.800.561.8187