GW Instek GPI-735A User Manual

Electrical Safety Tester
GPT/GPI-700A Series
USER MANUAL
GW INSTEK PART NO. 82PI-74500MG1
ISO-9001 CERTIFIED MANUFACTURER
This manual contains proprietary information, which is protected
by copyrights. All rights are reserved. No part of this manual may
be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing.
However, Good Will continues to improve products and reserves
the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng City, Taipei County 236, Taiwan.

GW Instek GPI-735A Specifications

General

Category	Test Equipment
Model	GPI-735A
Output Channels	3
Voltage Resolution	10mV
Current Resolution	1mA
Interface	USB, RS-232
Display	LCD
Channels	3
Resolution	10mV / 1mA
Output Voltage (Channel 1)	0 to 30V
Output Current (Channel 1)	0 to 5A
Output Voltage (Channel 2)	0 to 30V
Output Current (Channel 2)	0 to 5A
Ripple & Noise (CV)	< 1mVrms
Ripple & Noise (CC)	3mArms
Load Regulation (CV)	≤0.01%
Load Regulation (CC)	≤0.1% + 3mA
Line Regulation (CV)	≤0.01%
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 70°C
Input Voltage Range	100-240VAC, 50/60Hz

Summary

Product Introduction

Specifications

Test Specifications

Details for AC/DC Hi-Pot, Insulation Resistance, Ground Bond, and Continuity tests.

Operational Parameters

Precautions Before Operation

Safety Precautions

Covers essential safety notices, working place, operator precautions, and secure testing.

Panel Introduction

Front Panel

Details the controls and indicators on the front panel.

Rear Panel

Details the connectors and ports on the rear panel.

Operation Method

Main Display LCD

Prepare the EST for Use

Parameter Setup and Test Modes

Guide to setting up parameters and configuring various test modes.

Functionality of Remote Interface

Maintenance

Fuse Rating and Type