GW Instek GPI-735A - 5-2.Prepare the EST for Use

ELECTRICAL SAFETY TESTER
USER MANUAL
19
5-2. Prepare the EST for Use
z To view the Storage Steps
1. Press the MENU key to enter status MENU.
2. Use the left and right arrow keys to change knob’s resolution (group
or step). Use the knob to change the active step.
MENU
M E N U
0 - 0 0 A C
ELECTRICAL SAFETY TESTER
USER MANUAL
20
z To Edit/Save the Storage Steps
1. Follow the above procedure “To View the Storage Steps “ to select
a step.
2. Press the EDIT/SAVE key to enter status EDIT.
3. Use knob to adjust parameter. Use arrow keys to change knob’s
resolution.
EDIT/SAVE
E D I T
A C W