GW Instek LCR-816 - LCR Meter Specifications; Measurement Parameters and Models

LCR-800 Series User Manual
35
5. SPECIFICATIONS
Measurement Parameters:
Inductance (L
s
/L
p
)
*
, Capacitance (C
s
/C
p
), Resistance (R
s
/R
p
), Dissipation (D),
Quality Factors (Q), Equivalent Series Resistance (ESR) and Equivalent Parallel
Resistance (EPR).
Measurement Models:
Four kinds of measurement model can be selected. Two measurement
parameters measured and displayed simultaneously.
R/Q, C/D, C/R, L/Q
Display Ranges:
Primary Display
Inductance (L) : 0.00001mH

99999H
Capacitance (C) : 0.00001pF
 99999F
Resistance (R) :
0.0000199999k
Secondary Display
Dissipation factor (D)
+
: 0.0001

9999
Quality factor (Q)
***
: 0.0001

9999
Equivalent Series Resistance (ESR)
+
:
0.00019999 k
Equivalent Parallel Resistance (EPR)
+
:
0.00019999 k
Dissipation factor (D)
+
in ppm : 1 ppm

9999 ppm
Quality factor (Q)
**
in ppm : 1 ppm

9999 ppm
DELTA % : 0.00001%

99999%
If any of these quantities is negative, the “-“ negative indicator is displayed
*
s=series, p=parallel, ESR=Rs
**
with R
***
with L or R
+
with C