GW Instek LCR-816 - BIN Setting Conditions

LCR-800 Series User Manual
46
MODE setting
! Press F1.F2 key to select the white inverted characters “MODE”.
! Press F3 key to select C/D or C/R or L/Q or R/Q shown as Figure 8-2
below. For further detailed description, please refer to 4-4-1.
Figure 8-2
CIRCUIT setting:
! Press F1/F2 key to select the white inverted characters “CIRCUIT”.
! Press F3 key to select SER or PAR shown as Figure 8-3 below. For further
details, please refer to 4-4-2
Figure 8-3
SPEED setting:
! Press F1/F2 key to select the white inverted characters “SPEED”.
EXIT
SET BIN BIN SUM
:C/D CIRCUIT:SER.
SPEED:SLOW DISPLAY:BIN
C D
BIN
F:1.0000kHz MANU
V:1.000 V INT.B OFF
RANGE:1 C.V : OFF
DELAY:00000mS AVG : 1
SET
Press F1.F2
key to the
mode item
MODE
Press F3 key
to the C/D.
C/R.L/Q.R/Q
EXIT
SET BIN BIN SUM
MODE:C/D :SER.
SPEED:SLOW DISPLAY:BIN
C D
BIN
F:1.0000kHz MANU
V:1.000 V INT.B OFF
RANGE:1 C.V : OFF
DELAY:00000mS AVG : 1
SET
Press F2 key
to the
CIRCUIT
CIRCUIT
Press F3 key
to the SER.
PAR