LCR-800 Series User Manual
48
! Press ↵
↵↵
↵ key shown as Figure 8-6 below. For further details, please refer to
4-5-2.
Figure 8-5
V setting (VOLTAGE)
! Press F1/F2 key to select the white inverted characters “V”.
! Key-in testing voltage through panel keyboard.
! Press ↵
↵↵
↵ key shown as Figure 8-7 below. For further details, please refer to
4-5-4.
Figure 8-7
INT.B setting:
! Press F1/F2 key to select the white inverted characters “V”.
EXIT
SET BIN BIN SUM
MODE:C/D CIRCUIT:SER.
SPEED:SLOW DISPLAY:BIN
C D
BIN
:1.0000kHz MANU
V:1.000 V INT.B OFF
RANGE:1 C.V : OFF
DELAY:00000mS AVG : 1
CLR
Press
F1.F2
key to the F
F
Press
F3
key
to delete the
values input
in error
EXIT
SET BIN BIN SUM
MODE:C/D CIRCUIT:SER.
SPEED:SLOW DISPLAY:BIN
C D
BIN
F:1.0000kHz MANU
:1.000 V INT.B OFF
RANGE:1 C.V : OFF
DELAY:00000mS AVG : 1
CLR
Press
F1.F2
key to the V
V
Press
F3
key
to delete the
values input
in error
To Next Page
Loading...
