PEL-2000 Series User Manual
174
03/02/09
10 : 30
CC
Dyna
High
Configure
Previous
Menu
Protection
Go-NoGo
CH1
Other
S
Ω
Ω
Conf
2. Use the Selector knob to
highlight Load D-Time.
Note: Load D-Time is below
Independent, off-screen.
3. Press the Selector knob to edit
the selected setting, turn to
change the setting.
OR
Use the number pad to enter a
number.
4. Press the Selector knob or Enter
to confirm selection.
Note
The Delay Time only applies to the current channel;
other channels will not be affected.
Delay time only applies when the load is manually
turned on or during start up with the Auto Load On
setting (page 182).
All manuals and user guides at all-guides.com
To Next Page
Loading...