GETTING STARTED
27
Power Socket/
Fuse
The power supply socket
accepts the AC mains Voltage.
The fuse holder is located
below the power socket.
Power: 50/60 Hz (180 VA)
Fuse: T3.15A/250V
For fuse replacement details
see page 242.
Channel
Control port
(1~8)
Each channel has a dedicated
Channel control port to
enable external monitoring
and control. The channel
control port has 6 wire sockets
that are screw-less and self
clamping.
Required wire gauge: 24
AWG
For connection or
specification details see pages
56 & 235.
To Next Page
Loading...