GETTING STARTED
93
Save/Recall USB
In order to save data from a single channel to USB,
data must first be saved to the internal memory.
After data is saved to internal memory, all the files
can be saved to USB.
To recall saved files, the reverse is also true. Files
must be recalled from the USB flash drive to
internal memory. Then from internal memory the
data can be recalled to each channel*.
*Excluding SEQ data.
Save/Recall All
The SEQ, Preset, Memory or Setup data can be
saved from every channel into USB. SEQ, Preset
and Memory data is saved into a directory
(ALL0000-ALL0099) with a file for each channel,
whilst Setup data is saved in a single file.
To Next Page
Loading...