GW Instek PEL-3111 - Page 15

Updating the Firmware
The PEL-3000(H) allows the firmware to be updated by
end-users. Before using the PEL-3000(H), please check
the GW Instek website or ask your local distributor for
the latest firmware. Before updating the firmware,
please check the firmware version.
View Firmware Version
1. Press
Shift
+
Utility
Help
.
2. Select System/Info[F1].
3. The system information is listed in the display.
 Model: PEL-3000(H) model number.
 Serial Number: XXXXXXXX
 Firmware Ver.: Firmware version number.
 Website address.
Firmware update
1. Insert a USB drive into the USB port. Ensure the
USB drive has the firmware file located in the root
directory.
2. Press
Shift
+
File
FUNC
.
3. Select USB with the Media [F1] soft-key.
4. Press the File Utility [F5] soft-key.
5. Select the *.UPG upgrade file and press Select[F1]
twice. Once to select the file and once to confirm.
6. Wait for the update to complete and reset the
power.