EasyManua.ls Logo

GYMOST 7315CA - Common Faults and Solutions

GYMOST 7315CA
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 /
17
COMMON FAULTS AND SOLUTIONS
Problems
and
codes
Reason Treatment
The system
doesn't work
A.No power on or off
Connect the power, or turn the power switch to the“No”
position
B.
the
safety
lock
is
not
in
place
Put
the
safety
lock
in
place
C.No power to the controller or
digital
meter
Replace the controller or electronic meter head
D. poor line contact
Check system input/output terminals and communication
risers
Stop
suddenly
under
normal
conditions
A.
The
safety
lock
falls
off
Reset
the
safety
lock
B.system exception Ask the repairman to fix it
The button
is not
working
Keys not working
1. Replace the keypad and keyboard wiring 2. Replace
the motherboard 3. Replace the electronic meter
E-01
A, communication line contact
is
not
good
Reconnect the cables and check that the ports are
plugged
in
or
replaced
B
Bad
Digital
Watch
Replace
your
digital
watch
C,
Bad
Controller
Replace
the
controller
E-02
A.Motor wiring and faulty
motor
Replace the motor
B, Motor Line and controller
connection is not good or bad
controller
Check and reconnect or replace the controller
E-03
A.The photoelectric sensor is
not
installed
correctly
Check and reconnect
B.
poor
photoelectric
sensors
Replace
the
photoelectric
sensor
C. photosensitive organs or poor
first
contact
Check and re-connect/clean the photoreceptor dust layer,
grease
D
.
Bad
Controller
Replace
the
controller
E-05
A.
the
controller
is
damaged
Replace
the
controller
B.
the
motor
is
damaged
Replace
the
motor
C.
Mechanical
failure
Check
for
Clogged
Lube
or
rollers
E-07
The electronic meter did not
detect
a
safety
lock
signal
1. Check that the safety lock is in place. 2. Reinstall the
safety
lock
mechanism.
3.
Replace
the
electronic
meter
Show no
heart rate
A. holding the sensor cord in
place
or
holding
the
cord
poorly
Check and connect or replace the grips
B.electronic system line failure Replace your digital watch
Incline failure
A Defective incline motor or
controller
Change the incline motor or controller
B.Controller signal wire is
abnormal
Press the learning key of the controller to learn the incline
value.