Need help?Do you have a question about the GYS GYSMI 195 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 10 - 195 A |
| Process | MMA / TIG |
| Electrode Diameter | 1.6 - 5.0 mm |
| Protection Class | IP21 |
| Frequency | 50/60 Hz |
| Insulation Class | H |
| Duty Cycle | 60 % |
Explanation of Hot Start, Arc Force, and Anti Sticking features.
How to select MMA mode and set the welding current intensity.
Overview of Hot Start and Arc Force adjustment settings.
Step-by-step instructions for adjusting Hot Start and Arc Force settings.
Step-by-step guide for performing TIG Lift welding, including connections and arc initiation.
Specific steps for ending the TIG weld, including automatic fade and gas management.
Step-by-step instructions for activating and setting the automatic arc slope.
Instructions for qualified personnel and safety measures during maintenance.
Requirements for welding helmets and eye protection against arc rays.
Emphasizing correct power supply usage and earthing for electrical safety.
Precautions against flammable products, gases, and fire hazards.
Guidelines for welding in high-risk electrical, confined, or flammable environments.
Advisory for pacemaker users to consult a doctor before operating the equipment.
Common issues, causes, and remedies for MMA welding mode.
Common issues, causes, and remedies for TIG welding mode.
Warnings related to arc rays, fire hazards, and electrical safety.
To Next Page
