What to do if I feel tingling when touching my GYS GYSMI 80P Welding System?
If you are feeling a tingling sensation when touching the body of your GYS Welding System, it indicates an undervoltage issue, likely caused by a faulty earth contact. Check the plug and the earth connection of your installation.
What to do if my GYS GYSMI 80P Welding System green indicator is on but it doesn't weld?
If the green indicator is on but your GYS Welding System isn't welding, there may be a fault with the earth clamp or cable connection. Check all connections to ensure they are properly secured.
How to fix GYS Welding System when both indicators are on but there is no current?
If both indicators are illuminated on your GYS Welding System, but the machine isn't delivering any current, it's likely that the thermal protection has activated. Wait for the cooling cycle to complete.
What to do if the green indicator is on, but my GYS GYSMI 80P Welding System does not weld?
If the green indicator is on but your GYS Welding System isn't welding, there may be a fault with the earth clamp or cable connection. Inspect the connections to ensure they are properly secured.
How to fix GYS Welding System when 2 indicators are on, but there is no current?
If both indicators are illuminated on your GYS Welding System and the machine isn't delivering current, it's likely that the thermal protection has activated. Wait for the cooling cycle to complete before resuming use.
Read and understand safety recommendations before using or servicing. No unauthorized servicing.
Use in protected areas, wear protective gear for welding hazards like arc rays, heat, and fumes.
Covers hazards from fumes, gas, fire, explosions, and electrical safety, including gas bottle handling.
Understand EMF effects on medical implants and assess the welding area for potential electromagnetic problems.
Methods to reduce emissions, transport, transit, and installation requirements for the welding machine.
Procedures for maintenance, installation, product operation, and setup.
Details on power supply, generator connection, MMA, and TIG welding modes.
Guide to identify and resolve common symptoms, causes, and remedies for operational problems.
Covers warranty terms, exclusions, and procedures for claims.
List of replacement parts and the electrical schematic for the welding machine.
Descriptions of interface elements like potentiometer, indicators, and connectors for different models.
Primary and secondary electrical specifications, performance data, and duty cycles.
Operating/storage temperatures, IP rating, insulation class, physical dimensions, and weight.
Explanation of manual icons and details on CE compliance.
Information on UK CA, EAC compliance, and specific welding standards like EN60974.
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 10 - 80 A |
| Input Frequency | 50/60 Hz |
| Max Input Current | 16 A |
| Efficiency | 85 % |
| Protection Class | IP21 |
| Welding Process | MMA |
| Electrode Diameter | 1.6 mm |
To Next Page
