What to do if I feel tingling when touching my GYS GYSMI 200P Welding System?
If you are feeling a tingling sensation when touching the body of your GYS Welding System, it indicates an undervoltage issue, likely caused by a faulty earth contact. Check the plug and the earth connection of your installation.
What to do if my GYS GYSMI 200P green indicator is on but it doesn't weld?
If the green indicator is on but your GYS Welding System isn't welding, there may be a fault with the earth clamp or cable connection. Check all connections to ensure they are properly secured.
How to fix GYS GYSMI 200P when both indicators are on but there is no current?
If both indicators are illuminated on your GYS Welding System, but the machine isn't delivering any current, it's likely that the thermal protection has activated. Wait for the cooling cycle to complete.
What to do if the green indicator is on, but my GYS Welding System does not weld?
If the green indicator is on but your GYS Welding System isn't welding, there may be a fault with the earth clamp or cable connection. Inspect the connections to ensure they are properly secured.
How to fix GYS GYSMI 200P Welding System when 2 indicators are on, but there is no current?
If both indicators are illuminated on your GYS Welding System and the machine isn't delivering current, it's likely that the thermal protection has activated. Wait for the cooling cycle to complete before resuming use.
Read and understand safety recommendations before using the unit.
Safety precautions for the user and others, including protective clothing and ear protection.
Information on hazardous fumes, gases, and ventilation requirements during welding.
Precautions against fire and explosion hazards, including distance from flammable materials.
Safety guidelines for handling and storing gas cylinders during welding operations.
Electrical safety measures, including earthing, disconnecting power, and cable condition.
Common symptoms, their causes, and recommended remedies for operational issues.
Detailed technical specifications for the welding machines.
General| Input Voltage | 230 V |
|---|---|
| Welding Current Range | 10 - 200 A |
| Duty Cycle | 60% at 200 A |
| Frequency | 50/60 Hz |
| Efficiency | 85% |
| Insulation Class | H |
| Protection Rating | IP21 |
| Protection Class | I |
| Type | Inverter |
| Welding Process | MMA/TIG |
| Electrode Diameter | 1.6 - 4 mm |
To Next Page
