Need help?Do you have a question about the GYS GYSMI 165 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 10 - 160 A |
| Technology | Inverter |
| Welding process | MMA / TIG |
| Electrode diameter | 1.6 - 4.0 mm |
| Protection rating | IP21 |
| Input Frequency | 50/60 Hz |
| Open Circuit Voltage | 65 V |
| Duty Cycle | 60 % |
Details on electrode welding, including Hot Start, Arc Force, and Anti Sticking functions.
Instructions for selecting MMA mode and adjusting welding current.
Guidance on adjusting Hot Start and Arc Force for optimal welding performance.
Explanation and activation of the automatic arc slope feature for better weld finishing.
Guidance on electrode selection and preparation for optimal welding results.
Information on thermal protection indicators and duty cycle specifications.
Routine maintenance procedures and general advice for using the welding equipment.
Safety measures regarding arc radiation, environment, personal protection, and fire risks.
Important warnings for pacemaker users, thawing, and gas bottle handling.
Advice on minimizing EM interference and assessing the welding environment.
Common problems, their causes, and remedies for MMA and TIG welding modes.
Electrical schematics for various GYSMI welding machine models.
Identification and part numbers for replacement components of the welding machines.
Explanation of front panel symbols, icons, and technical terms.
Detailed description of the front panel layout, indicators, and controls.
To Next Page
