How to solve the post-gas default issue on my GYS GYSMI E160 Welding System?
If there is a default coming from post-gas or the gas has been stopped prematurely on your GYS Welding System, increase post-gas duration.
General| AC input voltage | 230 V |
|---|---|
| Power consumption | 7.5 kVA |
| AC input frequency | 50 - 60 Hz |
| Welding processes | - |
| Maximum welding current | 160 A |
| Minimum welding current | 10 A |
| Variable welding current | Yes |
| Maximum electrode diameter | 4 mm |
| Minimum electrode diameter | 1.6 mm |
Weight and Dimensions| Depth | 210 mm |
|---|---|
| Width | 100 mm |
| Height | 270 mm |
| Weight | 4600 g |
To Next Page
