What to do if I feel a tingling sensation when touching GYS Gysmi E200 FV?
If you feel a tingling sensation when touching the body of the GYS Welding System, it indicates that the unit is not correctly grounded. Check the plug and the grounding of your electrical network.
General| Input Voltage | 230 V |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Current Range | 10 - 200 A |
| Duty Cycle | 60% at 200 A |
| Efficiency | 85% |
| Insulation Class | H |
| Protection Class | IP23 |
| Electrode diameter | 1.6 - 4.0 mm |
| Technology | Inverter |
| Welding process | MMA/TIG |
Describes the digital display screen on the welding unit.
Shows the status of the MMA (Manual Metal Arc) welding mode.
Shows the status of the TIG (Tungsten Inert Gas) welding mode.
Adjusts welding current or other operational parameters.
Used to confirm settings or select operational modes.
Alerts the user when the unit is overheating.
Powers the welding unit on or puts it into standby mode.
Details power requirements, flexible voltage system, and initial device activation.
Explains MMA welding functions like Hot Start, Arc Force, and Anti-Sticking.
Outlines the steps for performing TIG Lift welding with protective gas.
Configures the gradual decline of welding current to prevent cracks.
Provides guidance on electrode selection, grinding, and flow rates.
Describes overheat protection and operational limits at different temperatures.
Instructions for routine servicing, cleaning, and checking electrical connections.
Tips for proper usage, electrode handling, and air circulation.
Essential precautions for arc welding risks like rays, shocks, fire, and fumes.
Guidelines for reducing electromagnetic interference during operation.
Lists common anomalies, their causes, and remedies for MMA-TIG and TIG modes.
To Next Page
