WORKSTATION GYSPRESS 10T PP CONTROL
EN
25
GENERAL INSTRUCTIONS
This user manual includes information on how to operate your device and the precautions to follow for
your safety. Please read it carefully before rst use and keep it carefully for future rereading. The use
of this device is reserved for professionals and only qualied and experienced operators should install,
adjust or use it.
Do not use this tool if any parts are missing or damaged. This product should not be modied in any way.
OPERATING THE MACHINE
All the instructions needed for correct use are stated in this user manual. Working methods that are not explicitly autho-
rised by the manufacturer, GYS, are prohibited.
FIRST-TIME USE
Before using your device for the rst time, please check for new updates.
1 2 3 4
O On
IN A WORKING ENVIRONMENT
This equipment should only be used in accordance with the limits stated on the indicator plate as well as this user
manual. All safety guidelines must be followed. In the event of improper or dangerous use, the manufacturer cannot
be held responsible.
Temperature ranges:
Use between -10 and 40°C (14 and 104°F).
Store between -20 and 55°C (4 and 131°F).
Air humidity:
Less than or equal to 50% at 40°C (104°F).
Less than or equal to 90% at 20°C (68°F).
Altitude:
Up to 1,000 m above sea level (3,280 feet).
Slips, trips or falls are a major cause of serious, or even fatal, injuries. Pay attention to the hoses left on the oor. This
appliance is not intended to be used in potentially explosive atmospheres. This device is intended for indoor use in a
well-lit environment on level ground.
ELECTRICAL SAFETY
It is crucial that the electrical system used is properly earthed. Electric shocks can cause serious direct or indirect acci-
dents and even death.
To Next Page
Loading...
Need help?
General
