H3C S5500-28 C-EI-DC Installation Manual

1-12
z You are recommended to use SFP transceivers of H3C on the S5500-EI series.
z The types of SFP transceivers may update with time. For information about transceivers, contact
H3C technical support or marketing staff.
z For the models and specifications of each kind of transceivers, refer to H3C Low End Series
Ethernet Switches Pluggable Modules Manual.
Combo Port
One SFP port and the corresponding 10/100/1000Base-T Ethernet port form a Combo port. For each
Combo port, either the SFP port or the corresponding 10/100/1000Base-T Ethernet port can be used at
a time. For details about the combo port mapping relationship, please refer to
Table 1-5.
Table 1-5 Combo port mapping relationship
Model SFP port 10/100/1000Base-T Ethernet port
GigabitEthernet1/0/25 GigabitEthernet1/0/22
GigabitEthernet1/0/26 GigabitEthernet1/0/24
GigabitEthernet1/0/27 GigabitEthernet1/0/21
S5500-28C-EI
S5500-28C-EI-DC
S5500-28C-PWR-EI
GigabitEthernet1/0/28 GigabitEthernet1/0/23
GigabitEthernet1/0/49 GigabitEthernet1/0/46
GigabitEthernet1/0/50 GigabitEthernet1/0/48
GigabitEthernet1/0/51 GigabitEthernet1/0/45
S5500-52C-EI
S5500-52C-PWR-EI
GigabitEthernet1/0/52 GigabitEthernet1/0/47
GigabitEthernet1/0/25 GigabitEthernet1/0/17
GigabitEthernet1/0/26 GigabitEthernet1/0/18
GigabitEthernet1/0/27 GigabitEthernet1/0/19
GigabitEthernet1/0/28 GigabitEthernet1/0/20
GigabitEthernet1/0/29 GigabitEthernet1/0/21
GigabitEthernet1/0/30 GigabitEthernet1/0/22
GigabitEthernet1/0/31 GigabitEthernet1/0/23
S5500-28F-EI
GigabitEthernet1/0/32 GigabitEthernet1/0/24
The SFP port and its corresponding 10/100/1000Base-T autosensing Ethernet port cannot be used
together at the same time. For details, refer to the Ethernet Port Configuration part in the Access
Volume of the H3C S5500-EI Series Ethernet Switches Operation Manual.

H3C S5500-28 C-EI-DC Specifications

General

Brand	H3C
Model	S5500-28 C-EI-DC
Category	Switch
Language	English