H3C UniServer R4950 G5 User Manual

3
Figure 1 BIOS setup screen
2. On the screen as shown in Figure 2, select Platform Configuration > PCH Configuration,
and press Enter.
For G5 servers, the Platform Configuration options are in the Advanced menu.
Figure 2 Platform Configuration screen
3. On the screen as shown in Figure 3, select PCH SATA Configuration or PCH sSATA
Configuration, which corresponds to the two configuration entries of the embedded RSTe
RAID controller, and then press Enter.

H3C UniServer R4950 G5 Specifications

General

Brand	H3C
Model	UniServer R4950 G5
Category	Server
Language	English