H3C UniServer R4950 G5 User Manual

4
Figure 3 PCH Configuration screen
4. On the screen as shown in Figure 4, select Configure SATA As, press Enter, and select an
operating mode.
For more information about setting the operating mode for an embedded RSTe RAID
controller, see "Features."
Figure 4 Modifying the storage controller operating mode
5. After the configuration is complete, press F4. On the dialog box that opens, select Yes to save
the current configuration and reboot the system to complete the storage controller operating
mode configuration.

H3C UniServer R4950 G5 Specifications

General

Brand	H3C
Model	UniServer R4950 G5
Category	Server
Language	English