H3C WA2620-AGN - Page 7

7
Figure 2 Diagram of ceiling bracket
Table 1 Description of WA2620-AGN interfaces
Feature
Description
Ethernet Port
The Ethernet port provides a 10/100/1000
BASE-T Ethernet connection to a switch.
Use a suitable Category 5 cable with
straight-through wiring and standard RJ-45
connectors to connect your AP to the
network.
LEDs
The LEDs indicate power and activity. See
Checking the LED Indicators for details.
Antenna
Connectors
The AP has three built-in internal antennas.
In addition, three RSMA antenna
connectors allow you to connect optional
external antennas.
Reset Button
To reset the AP.
RJ-45 Console
Port
Provides a serial interface to the AP for
diagnostic use. Default: 9600K, 8 bits, no
parity, 1 stop bit.
Wall-Mounting
Bracket and
Table-Top
Stand
The combined wall-mounting bracket and
table-top stand allows you to mount the
unit on a wall or stand it on a table top.
Suspended
ceiling bracket
The Suspended ceiling bracket (Ceiling
bracket and Slider) allows you to mount
the unit on a suitably ceiling tile separator.
Security slot
Dimensions (length x width x depth): 7 x 3 x
4 mm (0.28 x 0.12 x 0.16 in.) ,and a
standard Kensington lock is
recommended.
Slider
Ceiling bracket