Need help?Do you have a question about the H3C WA6520 and is the answer not in the manual?
General| Device Type | Wireless Access Point |
|---|---|
| Product Model | H3C WA6520 |
| Frequency Band | 2.4 GHz and 5 GHz |
| MIMO Technology | 2x2 MIMO |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Operating Humidity | 5% to 95% (non-condensing) |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Antenna Type | Internal Antennas |
| PoE Support | 802.3af |
| Operating Temperature | 0°C to +50°C (32°F to 122°F) |
| Storage Temperature | -40°C to 70°C |
| Weight | 1.2 kg |
| Mounting Options | Ceiling, Wall |
Identifies the intended audience for this installation guide, including network planners, field support, and administrators.
Explains the conventions used in the documentation for commands and GUI elements.
Provides information on how to submit comments and feedback regarding the product documentation.
Details various symbols used in the document, including warning, caution, important, note, and tip alerts.
Illustrates and describes network topology icons used to represent various network devices and signals.
Informs users that examples may differ from their specific device configuration or software version.
Provides critical safety instructions and warnings for installing the access point, including handling hot surfaces.
Outlines general safety precautions to prevent bodily injury and equipment damage during installation.
Details environmental requirements for the installation site, focusing on temperature and humidity.
Presents a visual flowchart outlining the sequence of steps for installing the access point.
Lists essential tasks to perform before installing the AP, including checking LEDs, recording MAC addresses, and ensuring cabling.
Illustrates the mounting bracket used for attaching the access point to walls, junction boxes, or ceilings.
Details the process of mounting the access point on a wall using the provided mounting bracket and hardware.
Explains how to connect the access point to a local power source using an AC/DC adapter or a DC power source.
Explains how to verify network connectivity for the AP in fit mode by executing a specific command on the AC.
Describes how to verify network connectivity for the AP in cloud mode by checking wireless service access.
Details the process of logging into the AP using a console port connection, including necessary equipment.
Explains how to physically connect the AP to a configuration terminal (PC) via the console port.
Instructs on configuring terminal emulator parameters required for accessing the AP through the console port.
Guides users on downloading and installing the Cloudnet App Int for smartphone management.
Details the steps to log into the Cloudnet platform to manage the AP remotely.
Provides a visual representation of the H3C WA6520 access point, highlighting its physical dimensions.
Lists the technical specifications for the WA6520, including dimensions, power consumption, antenna gain, power supply, and protocols.
Describes the status and function of the AP's LEDs and buttons in both fit and cloud modes, and reset button operations.
Illustrates the SFP transceiver module and optical fibers with LC connectors required for fiber port connections.
Provides detailed specifications for the SFP-2.5G-LX10-SM1310-DR-I transceiver module.
To Next Page
