Need help?Do you have a question about the H3C WA6320 and is the answer not in the manual?
General| Model | WA6320 |
|---|---|
| Device Type | Wireless Access Point |
| Frequency Band | 2.4GHz and 5GHz |
| Maximum Data Rate | 1.267 Gbps |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Antenna Type | Internal |
| Ethernet Ports | 1 x 10/100/1000BASE-T |
| Power Supply | PoE (802.3af/at) |
| Mounting | Ceiling/Wall mount |
| Dimensions | 220 mm x 220 mm x 45 mm (8.66 in x 8.66 in x 1.77 in) |
Identifies the target audience for this documentation, including network planners and support engineers.
Explains command and GUI conventions used throughout the documentation for clarity.
Provides contact information for submitting comments and feedback on the product documentation.
Details various symbols used in the document, including warnings, cautions, and notes.
Illustrates and describes icons representing different network devices and signals.
Informs users that examples may use different hardware or software versions than their own.
Provides critical safety warnings and instructions for personnel installing the AP to prevent injury or damage.
Details environmental requirements, including temperature and humidity, for the installation site.
Lists and illustrates the hardware accessories provided with the AP for installation.
Lists the tools required for installing the AP, such as screwdrivers, pliers, and drills.
Presents a visual flowchart outlining the sequential steps for installing the access point.
Lists essential tasks to perform before beginning the physical installation of the AP.
Provides principles for selecting an optimal and safe location for mounting the AP.
Offers important notes and general guidance before proceeding with mounting the AP on a wall or ceiling.
Details the mounting bracket and its components, showing how it is used for installation.
Provides step-by-step instructions for securely mounting the AP onto a wall surface, including drilling and screw placement.
Details the process of mounting the AP onto a ceiling tile, including precautions and steps.
Explains how to power the AP using a local power source or PoE.
Explains how to power the AP using a Power over Ethernet (PoE) connection.
Details how to power the AP using a separate AC/DC power adapter.
Instructs users to check the AP's LEDs after powering on to verify correct operation.
Explains how to verify network connectivity by using a command on the AC and checking AP status.
Lists the detailed technical specifications for the H3C WA6320 Access Point.
Describes the physical ports available on the AP, including their function and descriptions.
Provides a table detailing each port, its standards, and its specific use.
Explains the status and meaning of the LEDs on the AP for operational feedback.
Provides a table detailing each LED, its status, and its corresponding description.
To Next Page
