2-2
Determining the installation position
Determine the installation position by observing the following principles:
Few obstacles such as wall exist between the AP and clients.
Reserve clearance around the AP for heat dissipation. Ensure a minimum distance of 2 m
(6.56 ft) between the AP and other radiant resources, for example, wireless base station
antennas.
The AP does not hinder people’s daily work and life.
The place is not water seeping, water soaking, and condensing.
Mounting the AP
The AP can be installed only indoors. You can mount the AP on a wall, a junction box, or a ceiling.
Mounting bracket
Figure2-2 Mounting bracket
Mounting the AP on a wall
1. Place the mounting bracket against the wall and mark the installation holes on the wall.
To Next Page
Loading...
Need help?
General
